12V/24V DC & AC electric motors
Single/three-phase AC and 12/24V DC motors coupled to the pump via dedicated kits, for continuous or intermittent duty.
Page maintained by the Gazzera Srl engineering team, updated .
The electric motor defines the power pack’s character: single-phase 230V and three-phase 400V AC motors (0.25 to 5.5 kW) run S1 continuous duty for mains-powered machines; 12V and 24V DC motors deliver generous starting torque in S3 intermittent duty for mobile equipment and battery applications. The right choice starts from the actual duty cycle, the subject of our AC vs DC guide, and frame size, protection class (IP54/IP55) and controls follow.
The motor-pump coupling is where reliability is decided: dedicated coupling kits for every flange and shaft combination, alignment guaranteed by the platform, contactors sized for the actual currents (at 12V there is no room for improvisation). Every motor reaches the customer already coupled to the pump and wired according to the diagram.
Typical applications
Compatible with the lines
Related guides
| Power | 0.25 to 5.5 kW |
|---|---|
| Voltages | 12/24V DC · 230/400V AC |
| Duty | S1 · S3 |
| Protection class | IP54 / IP55 |
Frequently asked questions
What motors do you fit?
Single-phase 230V and three-phase 400V AC motors from 0.25 to 5.5 kW for continuous duty, and 12V/24V DC motors for the intermittent duty of mobile equipment. The choice starts from the actual duty cycle.
AC or DC?
AC withstands long cycles and pressure holding with minimal maintenance; DC delivers high starting torque for short battery-powered movements. Our AC vs DC guide explains when each pays off.
Does the motor arrive already wired?
Yes: every motor is coupled to the pump with dedicated kits and wired according to the diagram. DC contactors are sized for the actual currents.
Related components
Hydraulic pumps
Gear pumps for compact power packs: a wide displacement range for every flow/pressure combination.
Power pack accessories
Gauges, pressure switches, level indicators, heat exchangers and contactors: everything that completes the power pack.
Modular elements & solenoids
Modular blocks, NG6 solenoid valves, coils and connectors to build the power pack control logic.
Have an application in mind?
Send us your diagram or specs: we reply with a technical proposal sized for your application.